Unshielded Twisted Pair (UTP) Cable

Twisted pair cabling comes in two varieties: shielded and unshielded. Unshielded twisted pair (UTP) is the most popular and is generally the best option for school networks

The quality of UTP may vary from telephone-grade wire to extremely high-speed cable. The cable has four pairs of wires inside the jacket. Each pair is twisted with a different number of twists per inch to help eliminate interference from adjacent pairs and other electrical devices. The EIA/TIA (Electronic Industry Association/Telecommunication Industry Association) has established standards of UTP and rated five categories of wire

Categories of Unshielded Twisted Pair

• Category 1 Voice Only (Telephone Wire)


• Category 2 Data to 4 Mbps (LocalTalk)


• Category 3 Data to 10 Mbps (Ethernet)


• Category 4 Data to 20 Mbps (16 Mbps Token Ring)


• Category 5 Data to 100 Mbps (Fast Ethernet)

One difference between the different categories of UTP is the tightness of the twisting of the copper pairs. The tighter the twisting, the higher the supported transmission rate and the greater the cost per foot. Buy the best cable you can afford; most schools purchase Category 3 or Category 5. Category 5 cable is highly recommended.
If you are designing a 10 Mbps Ethernet network and are considering the cost savings of buying Category 3 wire instead of Category 5, remember that the Category 5 cable will provide more "room to grow" as transmission technologies increase. Both category 3 and category 5 UTP have a maximum segment length of 100 meters. In Florida, Category 5 cable is required for retrofit grants. 10BaseT refers to the specifications for unshielded twisted pair cable (category 3, 4, or 5) carrying Ethernet signals.